How to network windows vista home basic and windows xp using 2 Lan Cards[cable]?

Question

im having a network problem about this..can anyone help me??
i already it with a cable but still those two computers does not respond,i already installed the Link Layer Topology Discovery (LLTD) Responder but still it doesn't respond to each other.
pls.. do it step by step..
thank you!

Answer 1

I totally agree that a Crossover Cable is the way to go IF you do not want to use a router or similar device. You may want to consider the following for a Crossover Cable.



URL: http://www.deepsurplus.com/Network-Structured-Wiring/Ethernet-CAT5e-Crossover-Cables-3-5ft



I Hope this Helps!

Answer 2

If you don't have a router hub or switch, you are going to need to use a crossover cable, and since a crossover cable costs damn near as much as a router or a switch, you should proabbly just get one of those....



******





a crossover cable is a special network cable with the second and sixth pins swapped on the two ends of the cable. Your average ordinary network cable is NOT a crossover cable.

You are going to need an additional part. Again. if you are going to buy something, (and you need to) you should just get a router. You can get one for $30 and you won;t have to screw around configuring static IP addresses and the like. set it up like this:



.......Internet

............|

.......[router]

............^

........../....\

comp1....comp2

..

there are tons of instruction out there.

you are missing a part.

Answer 3

whilst Microsoft will desire you to maintain employing Vista you may deploy homestead windows XP consumer-friendly adequate. a million. Backup any documents you choose to maintain and placed onto homestead windows XP 2. Setup your BIOS (you will get right of entry to it precise once you power on your workstation) so as that it boots from the CD stress till now it boots from the no longer consumer-friendly stress 3. Insert the homestead windows XP CD and reboot your workstation 4. ascertain you initiate the homestead windows XP deploy software! in any different case the workstation is merely going to boot Vista lower back. 5. stick to the instructions and make sure you delete the winning partitions (ie Vista). 6. finally finally end up the installation by employing configuring your workstation the way you want it to be. in case you choose to place in distinctive working systems right here is the advised order of installation: a million. homestead windows (oldest to maximum modern) (ninety 5 then ninety 8 then 2000 then XP then Vista then Win 7) 2. Linux, GNU/HURD, or BSD (so it may encapsulate homestead windows) desire this helps out.