Linkys Wireless Router?

Question

I was wonderin if a Linkys wireless router is hard to install?? Im not a computer geek, so i dont know much except the basics. People say the cd does not work and advice me to call techinal suppport if i buy one. Well, if anyone with one have any adivce or knows if its hard to instal??Advice wanted!

Answer 1

It is not hard to install. The linksys really has one of the quickest and easiest setups around. There will be directions with it, but basically, you're going to connect your broadband connection to the router, and your computer to the router, then turn it on. Then you open a browser and go to 192.178.1.1 and set up a few options- name of your wireless network, channel, whether or not you want encryption. If you use DSL with PPPoE, then you have to put in your DSL username and password just like you have in Windows. Good luck!

Answer 2

No, it is not hard to install. I have a linksys router, and a linksys wireless card, to run my computer upstairs. When I installed the wireless card, all I had to do, was run the cd that came with it. It really did work, on the first try. You might have to reboot your computer, after you install it. Just go by the directions. IF you do have any problems, you can email linksys, or call them, they have very good support..Good Luck..

Answer 3

It's not hard, as long as you read the manual and follow the instructions.



Check out this Linksys Wireless router configuration article: http://www.home-network-help.com/wireless-router.html



:o)

picoHat

Answer 4

If u r in oosa, there is no problem as u can return the product if u do not like it. The product wud have gone out of market long back if the bundled s/w required a technician for installing it.

Answer 5

you mustn't be utilizing more effective than one router on an similar connection. It slows the relationship and conflicts may reason a good number of internet complications. after all in the journey that your configuration worked formerly, purely re-connecting it may get it operating again. you mustn't favor to re-configure. after all you purely favor to receive the router guide from the producer's website.

Answer 6

hello.. im a tech support.. it depends on what modem you have. if the pppoe is on the modem then you need to change it to bridge mode.. you still need to access the interface of the modem to change the setting..after that.. try to check on the manual for linksys.. access the interface for the router (it started 192.168.0.1-im not sure) and then login with your userid and password.. for more info call for tech support for linksys -1 800 3267114