Question:
Linksys switch only allows 3 things to be connected to internet?
Nick
2009-03-15 09:19:39 UTC
I have a linksys switch that is connected to a PC, a modem, and an Xbox 360. I just got a new computer and when I plug it into the switch, it picks up the switch but won't connect to the internet. Anyone know what's wrong?
Three answers:
Bobbie E
2009-03-15 09:24:41 UTC
Check your DHCP Scope. You might be out IP's.
Larry M
2009-03-15 09:34:59 UTC
well the linksys switch comes from the factory programmed fore 4 ip's you can change this to 5 I believe depending on your switch but you can find this out at http://linksys.com
tbshmkr
2009-03-15 09:29:37 UTC
Connect Modem [wired] to Switch [wired] to PCs.

=

Set switch POWER OFF.

-

Reset modem: With a straightened paperclip, press RESET button momentarily.

-

Wait 60 secs.

-

Set switch POWER ON.

-

Reset switch: With a straightened paperclip, press RESET button momentarily.

-

Wait 60 secs.

--

PC Command Line:

-

Click [Start] - Click [Run...] - enter: cmd, Click [OK]

-

At the prompt (c:\.....>) enter: ipconfig /release, press [ENTER]

-

At the prompt (c:\.....>) enter: ipconfig /renew, press [ENTER]

-

TEST: Connect to Internet.

--

If SUCCESS: Repeat Steps after PC Command Line on other PCs.

-

If NO SUCCESS:

-

At the prompt (c:\.....>) enter: ipconfig /all, press [ENTER]

-

Ensure DHCP Enabled == YES

-

If IP Address == 0.0.0.0 OR 169.254.0.0 to 169.254.255.255, perform ALL steps again.

-


This content was originally posted on Y! Answers, a Q&A website that shut down in 2021.
Loading...