Setting up Server 2003, do I NEED static IP?

Question

I am going to have a machine at my home run Server 2003. There will be several client machines.

Once I buy a domain, do I NEED to have a static IP address for my server? Is it an absolute MUST? It's expensive! lol

Can't I just set a reservation in my router for the server machine to hold an IP address within my range? What are the chances of DHCP using that address? Especially if I put it all the way at the end of my range?

Anyone know? Thanks!

Answer 1

The only reason you need to register a domain is if you are going to host a website. A domain on the Internet is different from a Domain in a Windows server environment. When talking about windows servers a domain is a centrally-managed group of computers using the Windows operating-system . You can call the domain what ever you want to. As far as the DHCP goes, you can assign an ip to the server, which suggested for servers. Since you have mutiple computes, I am guessing that you either have a broadbank connection, with a router connected to your broadband modem, or either a homenetwork set up with no internet connection. If either is the case, go to control panel, then network connections. Right click on Local Area Network. Double click tcp/ip and choose assign ip address. Enter you ip address, subnet and gateway and you will be good to go.

Answer 2

it is not necessary, but it is a pain in the but, and may end up costing more linking the dns to a dynamic ip through a third party vendor.



you cannot request to hold a specific ip from your isp when you are on dhcp, when their dhcp server shoots out a new ip you will get it without having an option.



pay the extra $10 or whatever to get a static ip and all of your problems have been solved, it'll save you alot of heartache in the long run

Answer 3

You can some kind of dynamic dns. (e.g. dyndns.com) But a static ip would be better. Consider changing your ISP. Some have cheap offers on static ips but that might depent on the country you life in.

Answer 4

you dont need a static IP you can use DYNDNS i think but you still have a to have a domain and domain name it is suggested if you have a domain though that it not be moveable hence the static part of things. good luck

Answer 5

you do not set up your guy or woman DNS, you're actually not a registered DNS server. you ought to by no potential make DNS seen to the internet. you ought to bypass on your area registrar's DNS configuration internet site and set up the A, PTR and CNAME settings. you ought to additionally set up an MX record pointing your area emails at your mail server. then you definately gets superb suited DNS counsel and human beings will attain your server. If that's on the comparable connection you utilize on your information superhighway you could not view your gadget from interior your community utilising its' area call, as your inner DNS would be pointing at your guy or woman router from outdoors. this might in all risk in simple terms return the router configuration internet site. For this you could the two set a direction on your handle in the fixed routing table of your router if it facilitates this, or you could ought to tutor off the router DHCP server and set up the DHCP on the domicile windows server to difficulty itself by way of fact the DNS server to boot. then you definately can set up a close by basically DNS record set to show on the server inner (deepest) handle as your area. the comparable settings you used for the registrar settings, yet utilising the indoors handle. you nevertheless ought to show your machines to the gateway utilising the handle of the router in the DHCP. this might enable viewing the server the comparable as from outdoors.