How to set a TP-LINK wireless router as a network hub, using the network DHCP?

Question

I have a small firewall (s-box) connected to my internet cable modem, that has an internal DHCP server. 3 PCs connected by cable to the s-box. Now I've connected a TP-LINK wireless router to the s-box and I would like to add my laptop to the same network by wireless connection. WAN entry of the TP-LINK is now connected to the s-box. LAN entry can connect to any of the PCs but not necessary. Problem is that the TP-LINK has its own subnet IP (192.168.1.1) and so my laptop is in a different subnet than rest of network. When trying to set the TP-LINK IP address to same subnet mask of the network, I get error message. Disabling the DHCP option of the TP-LINK causes a limited wireless connection in my laptop (no IP address). How can I set the router to work as hub?

Answer 1

There is no advantage to a hub.



Ethernet hubs operate as Layer 2 devices in the OSI model, the same as network switches. Although offering comparable functionality, nearly all mainstream home network equipment today utilizes network switch technology instead of hubs due to the performance benefits of switches. A hub can be useful for temporarily replacing a broken network switch or when performance is not a critical factor on the network.



How the IP's are being mapped is the problem

Answer 2

Tp Link Hub

Answer 3

You can typically disable DHCP in the TP-LINK wireless router, and connect the internet cable modem to the LAN port of the TP-LINK. This basically converts your TP-LINK to a wireless Access Point, and any DHCP requests would be fielded by your cable provider.



Your cable provider, however, might not give out more than 1 IP address to internal clients in this state, so contact them to see if there is a limitation. Also, they might cache the MAC address/IP combination of your TP-LINK, so you might have to unplug your cable modem for a bit to "ghost" it on their network, and then plug it back in to reaquire an IP address for a different MAC address.

Answer 4

could could desire to characteristic some further information as you many times do not locate 'ethernet hubs' anymore. maximum are switches and there's a difference. Couple strategies acceptable now although: a million. Is the pc one that could desire to be plugged in for the community port to be on? some laptops by using default turn off the ethernet port whilst on battery. it is often became on many times in the potential administration element or on occasion in the community connections and then community section connection. 2. If the gadget became into presented by using your satellite tv for pc provider, they could have it configured to not enable further connections. Did they have you ever install any utility to be sure that the laptop to connect? 3. Can the pc see the laptop or the rest on the community? have you ever tried plugging it into everyone elses community?