Port forwarding question?

Question

Okay, I'm trying to set up a minecraft server, and i've forwarded port 25565. This is what I have done.

Router: Netgear Wireless N-150 WNR1000

Set up a static IP to 192.168.1.150 (Yes, I did that correctly).

These are the port forwarding settings in my router:

Service Name: Server1
Protocol: TCP/UDP
Starting Port: 25565
Ending Port: 25565
Server IP Address 192.168.1.150

However, When i use the port checking tool from this site : http://portforward.com/help/portcheck.htm, It says that my port is open.

I have gone into the windows firewall, and I have created exceptions for inbound and outbound to allow TCP traffic from port 25565. Should I have done UDP? I have also allowed the port checker program through the firewall. Also, i've disabled my firewall, uninstalled Avast, and still NOTHING. What am I doing wrong here? I just want to port forward port 25565 and make sure it is open so i can run my minecraft server. Someone please help me. It will be GREATLY appreciated. Thank you.

Answer 1

The router would desire to offer dynamic IP addressing for as much as 254 instruments related to it the two through wireless or ethernet cable. i've got faith the disaster is that throughout the time of all threat the main instruments, regularly the pc that knocks out the different instruments has its community configuration set to a particular fixed ip take care of rather of 'vehicle', that conflicts with what the router iss giving to a diverse gadget. make certain that the community configuration of all the contraptions are set to ask for an ip tackle from the router and should no longer have a fixed one fixed.

Answer 2

Well 192.168.1.150 is an internal IP address, meaning that only people inside the network will be able to connect to this IP. If that is the IP that you are giving to people so that they can try to connect then that is your problem. ID your external IP.

Answer 3

The other dude was correct, you need to port forward on your REAL address